Promise Technology VessRAID 1740s Скачать руководство пользователя страница 166

Страница: 166 / 324

VessRAID 1740s, 1840s Product Manual

152

Dedicated means this spare drive can only be used with the specified disk
arrays. Global means this spare drive can be used by any disk array.

If you chose Dedicated, highlight

Dedicated to Arrays

and press the

backspace key to erase the current value, then type the new value.

Specify the number(s) of the disk array(s) you want to assign your spare.
The current disk arrays are listed in parentheses.

A dedicated spare drive must be the same drive type, HDD or SSD, as the
drives in the assigned array.

Press Ctrl-A to save the spare drive.

Making Spare Drive Settings

To change spare drive settings:

From the Main Menu, highlight

Spare Drive Management

and press Enter.

A list of the current spare drives appears, including the following parameters:

Highlight the spare drive you want to change and press Enter.

Highlight the setting you want to change:

•

Revertible

– A revertible drive can be returned to spare status after you

replace the failed drive in a disk array. See “Transition” on page 247 for
more information.

•

Type

– Dedicated means this spare drive can only be used with the

specified disk array(s). Global means this spare drive can be used by
any disk array.

Press the spacebar to toggle between the choices.

For dedicated spares, type the array number the spare is assigned to.

Press Ctrl-A to save your settings.

Running Spare Check

To run Spare Check:

From the Main Menu, highlight

Spare Drive Management

and press Enter.

A list of the current spare drives appears.

Highlight the spare drive you want to check and press Enter.

Highlight

Start Spare Check

and press Enter.

The results appear next to Spare Check Status.

Содержание VessRAID 1740s





































































































































































































































































































































Результаты поиска

Содержание VessRAID 1740s

Отзывы:

Promise Technology VessRAID 1740s, Руководство по эксплуатации продукта, Страница: 166 / 324

Результаты поиска

Содержание VessRAID 1740s

Отзывы: