Promise Technology VessRAID 1740s Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 324

Promise Technology VessRAID 1740s Скачать руководство пользователя страница 126

VessRAID 1740s, 1840s Product Manual

112

may remain intact. You must determine the cause of the problem and correct
it. “Critical & Offline Disk Arrays” on page 276

•

Transport Ready

– The result of a successful Prepare for Transport

operation. You remove the physical drives of this logical drive and move
them to another enclosure or to different drive slots in the same enclosure.
After you relocate the physical drives, the logical drive status will show OK.

To create a logical drive, see “Creating a Logical Drive” on page 105.

To delete a logical drive, see “Deleting a Logical Drive” on page 106.

For a Degraded or Offline logical drive, see “Critical & Offline Disk Arrays” on
page 276.

Viewing Logical Drive Information

To view information for a single logical drive:

1.

Click the Subsystem

icon in Tree View.

2.

Click the Disk Arrays

icon.

3.

Click the Disk Array

icon.

4.

Click the Logical Drives

icon

5.

Click the Logical Drive

icon.

To specify an Alias or set the Read and Write Policies, click the

Settings

tab.

Logical Drive Status

See “Logical Drive Status” on page 111.

Logical Drive Synchronization

Synchronization is an automatic procedure applied to logical drives when they
are created. Yes means the logical drive was synchronized.

Adjustable Items

•

Alias (optional)

•

Read Policy

•

Write Policy

•

Preferred Controller ID

See “Making Logical Drive Settings” on page 113.

«
...
124
125
126
127
128
...
»

Содержание VessRAID 1740s





































































































































































































































































































































Отзывы:

Нет отзывов