manualshive.com logo in svg

Promise Technology VessRAID 1740s, Руководство по эксплуатации продукта, Страница: 206 / 324

Поделиться
Скачать
Promise Technology VessRAID 1740s Скачать руководство пользователя страница 206

VessRAID 1740s, 1840s Product Manual

192

For other logical drive functions, see “Managing Logical Drives” on page 111 
(WebPAM PROe) or page 154 (CLU).

Creating a Disk Array – Automatic

The Disk Array Automatic Creation option enables you to create a new disk array 
following a default set of parameters. One logical drive will be made automatically 
when you create the disk array. 

If you have multiple enclosures, a separate disk array and logical drive set will be 
created for each enclosure.

If you have both Hard Disk Drives (HDD) and Solid State Drives (SSD), separate 
disk array and logical drive sets will be created for your HDDs and for your SSDs. 
These two drive types cannot be mixed in the same disk array.

Creating

To create a disk array automatically:

1.

Press the 

 or 

 button until the display says 

Array Configure

.

2.

Press the 

 button and the display says 

Auto Configure

.

3.

Press the 

 button again and the display says 

Are you sure?

4.

Press the 

 button so the display says 

Yes.

5.

Press the 

 button to input your answer.

6.

Press the 

 button again to confirm.

The display shows the array, logical drive, and spare drive creation process.

Verifying

To verify the results of the automatic disk array creation:

1.

From the default screen, press the 

 or 

 button until the display says 

Logical Disk Management

.

2.

Press the 

 button and the display says 

000

.

3.

Press the 

 button again to choose this logical drive.

4.

From the default screen, press the 

 or 

 buttons to scroll through the 

information for the logical drive.

Содержание VessRAID 1740s





































































































































































































































































































































Отзывы:

Нет отзывов