Promise Technology VessRAID 1740s Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 324

Promise Technology VessRAID 1740s Скачать руководство пользователя страница 165

Chapter 5: Management with the CLU

151

Managing Spare Drives

Spare Drive Management includes the following functions:

•

Viewing a list of Spare Drives (page 151)

•

Creating a Spare Drive (page 151)

•

Making Spare Drive Settings (page 152)

•

Running Spare Check (page 152)

•

Deleting a Spare Drive (page 153)

Viewing a list of Spare Drives

To view a list of spare drives:

From the Main Menu, highlight

Spare Drive Management

and press Enter.

A list of the current spare drives appears, including the following parameters:

•

ID number

•

Operational Status

•

Physical Drive ID number

•

Configured Capacity

•

Revertible

– The spare drive returns to spare status after you replace

the failed drive in the disk array. See “Transition” on page 247 for more
information.

•

Type

– Global (all disk arrays) or Dedicated (to specified disk arrays)

•

Dedicated to Array

– The array to which a dedicated spare is assigned

Creating a Spare Drive

Only unconfigured physical drives can be used to make spares. Check your
available drives under Physical Drive Management. See “Managing Physical
Drives” on page 137.

1.

From the Main Menu, highlight

Spare Drive Management

and press Enter.

2.

Highlight

Create New Spare Drive

and press Enter.

3.

Highlight

Physical Drive Number

and press the backspace key to erase the

current value, then type the new value.

Specify the number of the physical drive you want for your spare. The
available drive numbers are in parentheses.

4.

Highlight

Revertible

and press the spacebar to toggle between

Yes

and

No

.

A revertible drive can be returned to spare status after you replace the failed
drive in a disk array. See “Transition” on page 247 for more information.

5.

Highlight

Spare Type

and press the spacebar to toggle between

Dedicated

and

Global

.

«
...
163
164
165
166
167
...
»

Содержание VessRAID 1740s





































































































































































































































































































































Отзывы:

Нет отзывов