Promise Technology VessRAID 1740s Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 324

Promise Technology VessRAID 1740s Скачать руководство пользователя страница 18

VessRAID 1740s, 1840s Product Manual

4

•

Support for the latest RAID technology—RAID 6—Protection from a
catastrophic double-drive failure.

•

Resilient data protection features such as Predictive Data Migration™ and
PerfectRAID™ provide rock solid data protection.

•

LUN Mapping and Masking bring flexibility for multiple application and OS
support on the same storage subsystem.

•

Open architecture, industry’s most comprehensive support for SAS and
SATA hard drives and standards-based management interfaces including
SNMP and WBEM.

•

Support for the industry standard Disk Data Format (DDF from SNIA)
ensures interoperability and drive roaming even among different RAID
vendors.

•

Compatible with leading SAS hard drives, host bus adapters, and RAID
controllers.

Subsystem and Controller Features

•

Drive Support: Up to 16 3.5" x 1" SAS or SATA 3 Gb/s hard disk drives.

•

Supports any combination of SAS and SATA drives in the system.

•

Staggered physical drive spin-up.

•

External I/O Ports: Dual 3 Gb/s SAS x4 host ports; One external 3 Gb/s SAS
x4 port for JBOD expansion.

•

Data Cache: Shared 512 MB predictive data cache (expandable to 2 GB);
Automatic write cache destaging; 72-hour battery backup (for 512 MB
cache).

•

Command Queue Depth: 512 commands per VessRAID (up to 1024
commands with 512 MB memory).

Operational Features

•

RAID Levels: RAID 0, 1, 1E, 5, 6, 10, 50, and 60 – Any combination of these
RAID levels can exist at the same time.

•

Configurable RAID stripe size: 64 KB, 128 KB, 256 KB, 512 KB, and 1 MB
stripe size per logical drive.

•

Background task priority tuning: Adjustment of minimum I/O reserved for
server use during all background tasks.

•

Hot spares: Multiple global or dedicated hot-spare drives with revert option.

•

Maximum LUNs per subsystem: 256 in any combination of RAID levels.

•

Maximum LUNs per array: 32 logical drives (LUNs). Supports LUN carving
by allowing an array to be divided into multiple logical drives. Supports out-
of-order logical drive deletion and re-creation.

«
...
16
17
18
19
20
...
»

Содержание VessRAID 1740s





































































































































































































































































































































Отзывы:

Нет отзывов