Promise Technology VessRAID 1740s Скачать руководство пользователя страница 177

Страница: 177 / 324

Chapter 5: Management with the CLU

163

To display NVRAM events:

From the Main Menu, highlight

Event Viewer

and press Enter.

Highlight

NVRAM Events

and press Enter.

The log of NVRAM Events appears. Events are added to the top of the list.
Each item includes:

•

Sequence number

– Begins with 0 at system startup.

•

Device

– Disk Array, Logical Drive, Physical Drive by its ID number.

•

Severity

– (lowest to highest) Information, Warning, Minor, Major,

Critical and Fatal

•

Timestamp

– Date and time the event happened.

•

Description

– A description of the event in plain language.

Press the up and down arrow keys to scroll through the log.

Clearing NVRAM Events

To clear the Runtime Event log:

From the Main Menu, highlight

Event Viewer

and press Enter.

Highlight

NVRAM Events

and press Enter.

Highlight

Clear NVRAM Event Log

and press Enter.

Press Y to confirm.

Содержание VessRAID 1740s





































































































































































































































































































































Результаты поиска

Содержание VessRAID 1740s

Отзывы:

Promise Technology VessRAID 1740s, Руководство по эксплуатации продукта, Страница: 177 / 324

Результаты поиска

Содержание VessRAID 1740s

Отзывы: