Polhemus 3SPACE FASTRAK Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 124

Polhemus 3SPACE FASTRAK Скачать руководство пользователя страница 97

FASTRAK MANUAL

Rev. G

A-2

JUNE 2012

POLHEMUS DOES NOT WARRANT AND SPECIFICALLY DISCLAIMS THE
WARRANTY OF MERCHANTABILITY OF THE PRODUCTS OR THE WARRANTY OF
FITNESS OF THE PRODUCTS FOR ANY PARTICULAR PURPOSE. POLHEMUS MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT OF TITLE AND AGAINST PATENT
INFRINGEMENT, OTHER THAN THOSE SPECIFICALLY SET FORTH HEREIN.

IN NO EVENT SHALL POLHEMUS BE LIABLE UNDER ANY CIRCUMSTANCES FOR
SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT
LIMITED TO LOSS OF PROFITS OR REVENUE. WITHOUT LIMITING THE FOREGOING
POLHEMUS’S MAXIMUM LIABILITY FOR DAMAGES FOR ANY CAUSE
WHATSOEVER, EXCLUSIVE OF CLAIMS FOR PATENT INFRINGEMENT AND
REGARDLESS OF THE FORM OF THE ACTION (INCLUDING BUT NOT LIMITED TO
CONTRACT NEGLIGENCE OR STRICT LIABILITY) SHALL BE LIMITED TO BUYER’S
ACTUAL DIRECT DAMAGES, NOT TO EXCEED THE PRICE OF THE GOODS UPON
WHICH SUCH LIABILITY IS BASED.

The Products are not certified for medical or bio-medical use. Any references to medical or bio-
medical use are examples of what medical companies have done with the Products after
obtaining all necessary or appropriate medical certifications. The end user/OEM/VAR must
comply with all pertinent FDA/CE and all other regulatory requirements.

«
...
95
96
97
98
99
...
»

Содержание 3SPACE FASTRAK





























































































































Отзывы:

Нет отзывов