Polhemus 3SPACE FASTRAK, Руководство пользователя, Страница: 66 / 124

FASTRAK MANUAL
Rev. G 61 JUNE 2012
System Data Record: IEEE Floating-Point Format
RECORD IDENTIFIER ....... none
INITIATING COMMANDS ..... P or in continuous mode
byte(s) Identification Format
1 ..... Record type, “0” A1
2 ..... Station Number A1
3 ..... System error code A1
(See Note 2 on previous page.)
?* ..... ASCII space character A1
?* ..... Carriage return, line feed
?* ..... x,y,z position Cartesian coordinates 3(SingleFP)
?* ..... az,el,roll Euler orientation angles 3(SingleFP)
?* ..... X-direction cosines of the receiver’s x,y,z axes. 3(SingleFP)
(See Note 1.)
?* ..... Y-direction cosines of the receiver’s x,y,z axes. 3(SingleFP)
(See Note 1.)
?* ..... Z-direction cosines of the receiver’s x,y,z axes. 3(SingleFP)
(See Note 1.)
?* The system data record contents are specified by the user using the ‘O’ – Output
Data List command (page 57 ) and may vary from configuration to configuration.
Therefore, the specific location of a data item in the output record is not
determined until the record contents are defined.