Polhemus 3SPACE FASTRAK, Руководство пользователя, Страница: 15 / 124

FASTRAK MANUAL
Rev. G 10 JUNE 2012
4. FASTRAK Commands Index
Cmnd.
Ltr
FASTRAK Command Title Brief Description Page
A Alignment Reference Frame Defines reference frame and origin 37
B Boresight Sets AER to zero or the value set by G 39
b Unboresight Removes new reference set by B 40
C Continuous Output Mode Enables continuous data output 41
c Disable Continuous Output Disables continuous data output 42
D Enable Fixed Metal Compensation Turns on compensation (if applicable) 43
d Disable Fixed Metal Compensation Turns off compensation (if applicable) 44
e Define Stylus Button Function Modifies stylus button function 45
F Enable ASCII Output Format Enables ASCII output format 46
f Enable Binary Output Format Enables binary output format 47
G Boresight Reference Angles Allows B to yield specific AER output 49
H Hemisphere of Operation Defines operating side of transmitter 50
I Define Increment Control output by receiver movement 53
l Active Station State Turns a receiver station off or on 54
N Define Tip Offsets Modifies stylus tip offsets 56
O Output Data List Changes data output list 57
o Set Output Port Modifies output port parameters 62
P Single Data Record Output Requests a single data output record 63
Q Angular Operational Envelope Sets angular operational envelope 64
R Reset Alignment Reference Frame Clears previous alignment for new entry 66
r Transmitter Mounting Frame Modifies transmitter mounting frame 67
S System Status Record Requests a system status record 68
T Built-In-Test Information Clears BIT error and obtains more info 70
U Set Unit Inches Sets XYZ measurements to inches 72
u Metric Conversion Units Sets XYZ measurements to centimeters 73
V Position Operational Envelope Sets XYZ operational envelope 74
v Attitude Filter Parameters Modifies AER filter parameters 76
W Reset System to Defaults Resets EEPROM to default settings 79
X Configuration Control Data Modifies configuration data in status record 80
x Position Filter Parameters Modifies the XYZ filter parameters 81
y Set Synchronization Mode Modifies sync mode 83
^K Save Operational Configuration Saves current configuration to EEPROM 85
^Q Resume Data Transmission Allows data to be transmitted 86
^S Suspend Data Transmission Restricts data from being transmitted 87
^Y Re-initialize System Invokes start up as if power was cycled 88