Perrot Greenkeeper Feedback, Руководство пользователя

Страница: 57 / 143

User Manual
Bed ‐ GK 1+2e Rev. 03.04.2019 Page 57 / 143
Password timeout time: The log ‐ on password remains valid for the period of time entered.
After the time expires the password must be re ‐ entered.
Value range: 100 ‐ 3600 seconds
Default: 1800 sec.
Example: 1. The password was entered in Remote Control.
2. The connection was terminated.
3. If the connection is not re ‐ established within the given period
of time the password must be re ‐ entered.
Exit the entry mode by clicking Ok.
To save the updated data, press yes to confirm it.
For details on incoming information please refer to the Remote Terminal Control chapter 14 in
the User Manual.
7.10.4 Modem Commands
Initialization String Description
AT ‐ Attention, Modem control command
The AT prefix tells the modem that AT commands are sent to the modem.
&F ‐ Recall factory default configuration
This is used to load the default configuration stored in the firmware. The modem will be restored to
factory settings. If the modem is connected the command will not be executed.
S0=n Number of rings to Auto ‐ Answer
Register S0 sets the number of rings to auto ‐ answer. If S0 > 0, then every incoming call will be
automatically answered. The value in S0 sets the number of rings that must occur before the
modem automatically answers the incoming call.
Values valid for Germany: 0...5 rings (S0=1)
Values valid for Austria: 0...5 rings (S0=1)
Values valid for Switzerland: 0, 2...10 rings (S0=2)
Default values: 0= No auto ‐ answer
Default values: 1= Auto ‐ answer on (1 ring)