Perrot Greenkeeper Feedback, Руководство пользователя

Страница: 125 / 143

User Manual
Bed ‐ GK 1+2e Rev. 03.04.2019 Page 125 / 143
14.4.6 Change Active Programs ‐ Menu 04
In this menu you can change the program schedule for a selected day.
PERROT REGNERBAU REMOTE TERMINAL ‐ CHANGE ACTIVE PROGRAMS 16.01.12 16:31:19
Program Start time Corr. Dur. Consump. VCU Programs
1: 1 ‐ FLIK
2:
3:
4:
Irrig. St. ‐ Inactive VCU time ‐ 16:29
[1] ‐ Start [2] ‐ Stop [3] ‐ Reset [7] ‐ Next VCU Prg [9] ‐ Prev. VCU Prg
Single : Select here, whether the program should be removed from Change Active Programs
after it has been invoked for the first time.
Enter [0] if : The program is not to be removed.
Enter [1] if : The program is to be removed after it has been invoked for the first time
!
Progr. Name: Type the program name for your program. For a selected day you can enter a
maximum of 4 different programs with 3 start times each. On entering a program
that already exists the following error message will be issued:
Code:008 ‐ xxxxx is already used.
Should this happen either remove one of the programs from Change Active Programs
or select another program.
To delete a program simply remove the program name from Change Active
Programs.
Start times: You have the option of selecting up to 3 start times.
You can select times from 00:00 ‐ 23:59 in increments of 5 minutes.
Should the stop time and the next start time overlap you will receive an error
message: Code:048 ‐ xx:xx Overlap time
In this case select another start time.
To delete a start time, simply enter 0 in the start time field.
Correction: Here you can change the percentage of Precipitation or Duration.
The range is from 10% ‐ 300% in increments of 5%.
If you enter 200% the program will start twice with 100%.
Default value: 100%