Perrot Greenkeeper Feedback, Руководство пользователя

Страница: 97 / 143

User Manual
Bed ‐ GK 1+2e Rev. 03.04.2019 Page 97 / 143
Stop time: Stop time (program stopped by the weather station or manually).
Position: Sequential number
1 ‐ 1600 (480 for Single valves / Sectors program).
State: Valve state. 2 states per valve.
ON / OFF.
Time: Start time of the irrigation program.
Status valve: Status message from the decoder (ONLY FOR BI ‐ DIR ‐ DECODER)
OK (green) no error
Error (red) Error (see status report)
NA (grey) no FB ‐ Decoder installed
S 5: Readout of the V/I flow meter.
If a flow meter is connected
the actual flow is displayed here.
Estimated flow: Flow calculated from the data entered.
S 6: Readout of the P/I pressure gauge.
If a pressure gauge is connected
the actual pressure in bars is displayed here.
Print: Hardcopy of the report displayed on the printer.
Previous report: Previous report (only when more than 1 report is stored).
Next report: Next (older) report.
A maximum of 4000 valve activities can be stored in the VCU.
For a maximum of 133 valves this means 15 reports. If more valves are used in a program the
maximum number of reports is reduced accordingly.
For 180 valves per program only 11 reports are generated.
The calculation is made as follows:
4000/180 = 11,1 ‐ 11 reports
Whenever the capacity is exceeded, the oldest report is deleted.
All reports then move down one position. The latest report is given No. 1.
Each valve generates two types of status information. One when it is opened and one when it is
closed.