Perrot Greenkeeper Feedback, Руководство пользователя

Страница: 38 / 143

User Manual
Bed ‐ GK 1+2e Rev. 03.04.2019 Page 38 / 143
When entering data pay attention to the following notes:
The maximum flow rate is given by the pump capacity.
When more than one pump is used the sum of all pumps is valid.
If a value is higher than the maximum flow rate given you will receive an error message:
Code:003 ‐ xx above limit The value entered is too high.
The flow rate of the hydraulic groups and sectors must be higher than (or identical with) the flow
rate of the valves assigned to them. If a value is entered that is lower you will receive an error
message:
Code:023 ‐ xxxx invalid flow
The value entered is invalid.
xxxx represents the valve in question.
If the value entered is below the valid value range the following error message is sent:
Code:002 ‐ xx below limit
Enter a higher value.
By changes all simulated programs will be deleted.
Programs stay on the hard disk.
All programs on the VCU have to be deleted.
Repeat a new simulation and transfer the program again at the VCU.