36
SunTouch
®
Control System Installation and User’s Guide
IntelliChlor
®
Salt Chlorine Generator Menu (13/14)
The IntelliChlor
®
Salt Chlorine Generator (SCG) menu features allow you to view the current salt level
(ppm) status, enable or disable the IntelliChlor (SCG) cell, control the amount of chlorine production and
to super chlorinate your pool/spa. While in normal operating mode (Pool, Spa mode or Spa Fill (Spillway),
the SunTouch
®
Control System will control the chlorinator output level. When the IntelliChlor (SCG) is
connected to the SunTouch Control System COM port on the motherboard, chlorination levels can only be
changed from the SunTouch Control System control panel. The IntelliChlor (SCG) control panel will be
disabled. The amount of chlorine introduced into the pool is determined by the amount of salt in the water,
the water temperature and the amount of time the pool operates in “Pool/Spa” mode. The IntelliChlor (SCG)
menu features are active when the salt chlorine generator is connected to the COM port on the SunTouch
Control System motherboard.
Note: While in “Freeze Protection” mode, the IntelliChlor (SCG) will not
operate during the time that the filter pump is operating. For more information, refer to the IntelliChlor
Electronic Chlorine Generator User’s Guide (P/N 520589).
IntelliChlor (SCG)
To setup the IntelliChlor (SCG):
Menu button:
Select the “IntelliChlor” menu.
Right button:
Enable or Disable IntelliChlor setting.
Up/Down buttons:
Select
Yes
to enable or
No
to disable IntelliChlor.
Right button:
Move to set the chlorine level for the pool.
Up/Down buttons:
Set the percentage amount of chlorine to produce in the pool. Set
the chlorination output level for the pool/spa water from 0 to 100%. The SunTouch
control system will determine the chlorinator output level when the system is
operating in “Spa” or “Pool” mode. The amount of chlorine introduced into the pool/
sap is determined by the amount of salt in the water, the water temperature and the
amount of time the pool/spa operates in these modes mode. Use the Up button to
increase the percentage level, and the Down button to decrease the percentage level.
Right button:
Move to set the chlorine level for the spa.
Up/Down buttons:
Set the percentage amount of chlorine to produce in the spa.
Set the percent level from 0% to 100% (Super Chlorination). Use the Up button to
increase the percentage level, and the Down button to decrease the percentage level.
Right button:
Move to the Super Chlorination settings (see below). If you do not
want to Super Chlorinate the pool/spa, press the Right button to skip these settings
until the salt level/status screen displays.
IntelliChlor status and error messages:
Up/Down buttons:
The current pool/spa salt level (ppm) is displayed on the screen.
If an IntelliChlor (SCG) error is detected, an error message will be is displayed on the
screen. To view the IntelliChlor (SCG) status and error messages, see “IntelliChlor
Status and Error Messages” on page 32. Press the Right button to return to the main
menu items.
Super Chlorination:
Up/Down buttons:
Select
Yes
to enable Super Chlorination or
No
to disable Super
Chlorination.
Right button:
Move to the Super Chlorination “Run Hours” setting.
Up/Down buttons:
Set the number of hours to run Super Chlorination. 24 hours is
the default setting. The run hours can be set from 0 to 72 hours. Use the Up button to
increase the run hours, and the Down button to decrease the run hours.
The display shows the current salt level in the water.
Left button:
Press the Left button to return to the main status screen.
IntelliChlor
Enable: YES
IntelliChlor
Pool %: 50
IntelliChlor
Spa %: 0
Main Menu 13/14
IntelliChlor
IntelliChlor
Super Chlor: YES
IntelliChlor
Run Hours: 12
Salt: 2900 ppm
[OK - NO ERRORS]
Salt: 3200 ppm
[SUPR CHLRINATE]
