32
SunTouch
®
Control System Installation and User’s Guide
Pump Menu (12/14)
(Continued)
IntelliFlo
®
VF Pump
From the IntelliFlo
®
VF Pump menu you can assign circuits to control the pump flow rate (GPM), priming,
also filter, backwashing, vacuum functions and view the current pump status. For more information about the
IntelliFlo VS Pump, refer to the IntelliFlo VF Pump Installation and User’s Guide (P/N 350075).
To assign up eight (8) pump speeds and circuits for the IntelliFlo VS Pump:
Menu button:
Select the
Pumps
12/14
menu.
Right button:
Press the button to view the type of pump to select.
Up/Down buttons:
Select
IntelliFlo VF
them press
Right button
again to select.
Press
Up/Down buttons
to view the
Pump Parameters
menus:
CIRC. SETUP
,
FILT. CIRC.
,
FILTER
, PRIMING,
BACKWASH
,
VACUUM and STATUS.
Press
Right button
to choose one of the parameters.
Press the
Right button
again to
ASSIGN FLOWS
(GPM) setting.
Press
Up/Down buttons
set the pump flow rate (15 - 130 GPM).
Press
Right button
to
CIRCUIT SETUP
for the pump. Press
Up/Down buttons
to
view the circuits for the first of eight (8) pump circuits:
[NONE, SPA, POOL, AUX
1, AUX 2, AUX 3, FEATURE 1-4, SOLAR, HEATER, POOL HEAT, SPA HEAT,
FREEZE, POOL/SPA, and SOLAR/HT (solar/heater)].
Press
Right button
to select the circuit.
Note: Selecting “Pool/Spa” or
“Solar/HT” combines several circuits into the same pump speed for pool and spa or
for solar and heater combination systems. Normally this would require programming
two separate pump speeds for each function. Using one of these selections, free-up
one of the four pump speed for other uses.
Press
Right button
to continue to assign pump
FILT. CIRC.
and
CIRCUITS
. You
can assign up to eight (8) pump speeds and circuits.
When finished assigning pump flow rate and circuits, press the
Right button
until
FLOWS
is displayed, then press the
Up/Down buttons
and select
FILTER
.
Press
Right button
to select
Filter Params Time.
Press the
Up/Down buttons
to set
the Filter Size (1000 to 255000 gallons).
Press
Right button
to select
Filter Params Manual Filter.
Press the
Up/Down
buttons
to set the Filter Size (15 - 130).
When finished, Press
Right button
to select
Filter Params Turns
. Press the
Up/
Down buttons
to set the number of pool cycle turns (1-4).
When finished assigning filter parameters, press the
Right button
until
FLOWS
is
displayed, then press the
Up/Down buttons
and select
FILTER
.
Press
Right button
to select
Filter Params Time.
Press the
Up/Down buttons
to set
the Filter Size (1000 to 255000 gallons).
Press
Right button
to select
Filter Params Manual Filter.
Press the
Up/Down
buttons
to set the Filter Size (15 - 130).
Assign Flows
1 - GPM: 80
Main Menu 12/14
Pumps
Circuit Setup
1 - [ POOL ]
Pump Type
[INTELLIFLO VF ]
Filter Params
Size: 25000
Pumps Parameters
Menu: FILTER
Filter Params
Turns: 2
Filter Params
Man Filt: 30
Pumps Parameters
Menu: CIRC. SETUP
