17
SunTouch
®
Control System Installation and User’s Guide
Schedules Menu (4/14)
Scheduled start and stop programs can be assigned to pool, spa and auxiliary circuits (AUX 1, AUX 2,
AUX 3) and FEATURE 1 - 4 functions. The start and stop times can be programed to run automatically
within a 12 hour period. The default run time for a scheduled circuit is 8:00 AM to 5:00 PM which can be
adjusted in 15 minutes increments. A maximum of four scheduled programs can be setup for any one circuit,
with a total of six programs for all circuits combined.
To program a circuit:
Add a new program to a circuit
Press the
Menu > Right arrow buttons
to select the
Schedules menu
(4 of 14).
Press the
Right button
to access the schedule settings and program an available
circuit.
Press the
Up/Down arrow buttons
to select the circuit to program. The circuits
are:
POOL, SPA, AUX 1, AUX 2, AUX 3, FT 1 - FT 4
. If there existing programs
assigned to circuits, use the
Up/Down arrow buttons
to scroll through the each
programmed circuit.
Press the
Right arrow button
twice to select the mode settings (
Add, Edit Delete
).
To add a program, Use the
Up/Down button
to select
Add
. Press the
Right
arrow
button
.
Edit
is displayed (blinks on and off) and the circuit number will increment
from zero to one (1/1). At this point there are still three available circuit that can be
assigned to that circuit.
Mode settings
•
Add:
Add up to four programs to the selected circuit.
•
Delete:
Delete the current program
•
Edit:
Move to the Start/Stop time for the current circuit program.
Set the start and stop time
Press the
Right arrow button
to set the
START time
setting for the circuit.
Press the
Up/Down arrow button
to set the
START time
to automatically start the
circuit. Adjust the start time in 15 minutes increments for AM or PM.
Press the
Right arrow button
to move to
STOP time
setting.
Press the
Up/Down button
to set the time to automatically stop the circuit. Adjust the
stop time in 15 minutes increments for AM or PM.
Press the
Right button
twice to set or edit another program
(e.g. AUX 1-3 or FT. 1 - 4).
or
Press the
Left button
to return to the main status screen.
Main Menu 4/14
Schedules
Schedule [Pool ]
Prg: 0/0 - Add
Schedule [Pool ]
Start: 8:00 AM
Schedule [Pool ]
Stop: 5:00 PM
Schedule [Pool ]
Prg: 2/1 - Edit
Schedule [Pool ]
Prg: 1/1 - Add
Main Menu 4/14
Schedules
Schedule [FT. 1 ]
Prg: 1/0 - Edit
POOL 71°F / 91°F
11: 51AM HEATER
Schedule [FT. 1 ]
Prg: 0/0 - Add