Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 94 / 208

A. CLI Command Descriptions
A-56
July 2002 4800-A2-GB20-10
show interface dsl {
port_id
} performance
Minimum Access Level: User
The show interface dsl performance command displays performance information for all
DSL ports or a specified DSL port.
port_id – Specifies that the display should be limited to this specified port. If all is
specified, information is displayed for all ports.
performance – Specifies that performance statistics for the specified port should be
displayed.
Example:
IAC#show interface dsl all performance
Display results:
„
Status – The status of the link:
– dormant – The link has not yet trained up.
– down – The link is down.
– notConnected – The link is training.
– unknown – The link’s status cannot be determined.
– up – The link is enabled and ready to send packets.
„
Line Rate Up – The upstream data rate.
„
Line Rate Down – The downstream data rate.
„
Margin Up – The amount of distortion that can be tolerated, in dBm, upstream.
„
Margin Down – The amount of distortion that can be tolerated, in dBm, downstream.
„
Attainable Rate – The maximum rate negotiated.
„
Attenuation – The decrease of intensity of the signal across the link, in dB.
show interface dsl {
port_id
} rate
Minimum Access Level: User
The show interface dsl rate command displays the data rate for all DSL ports or a
specified DSL port.
port_id – Specifies that the display should be limited to this specified port. If all is
specified, information is displayed for all ports.
rate – Specifies that the current rate of the specified port should be displayed.
Example:
IAC#show interface dsl all rate
Table A-32. Show Command (5 of 20)