Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 38 / 208

5. Monitoring and Troubleshooting
5-6
July 2002 4800-A2-GB20-10
Front Panel LEDs
If you have access to the unit, check the front panel LEDs. These are described in
the
BitStorm 4800 Installation Guide .
If an LED that should be lit during normal operation is not lit, verify that it is
functional by using the test leds command of the Command Line Interface or the
Diagnostics/Test LEDs screen of the Web interface.
Show Commands and Web Interface Status Screens
The show command of the Command Line Interface and various screens of the
Web interface show the condition of the unit and its interfaces, including error
statistics for the ports. The following table shows how to access the information.
Table 5-2. How to Locate Status Information
For Information
About . . .
Use the CLI Command . . .
Use the Web Interface
Screen . . .
Bridge show bridge Status/Bridge
Filters show filter Configuration/Filter
Filter Bindings show filter-binding Configuration/Binding
Filter Rules show filter-rule Configuration/Rule
Console Port show interface console Configuration/Console
DSL Ports show interface dsl port_id Status/DSL Port Statistics
Ethernet Ports show interface ethernet port_id Status/Ethernet Statistics
Modem Port show interface modem Configuration/Modem
V.35/X.21 Port show interface v35 Status/V.35 Statistics
Management (IP) show management ip Configuration/Management/
Address
Management (IPsec) show management ipsec Configuration/IPsec
Management (SNMP) show management snmp Configuration/SNMP
Self-Test Results show system selftest System/Self-Test Results
Syslog show syslog Status/Syslog
System show system status Status/System Information
Users show user-accounts Status/Users