Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 53 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-15
configure interface dsl {
port_id
} min-downstream-speed {
rate
}
Minimum Access Level: Administrator
The configure interface dsl min-downstream-speed command specifies the minimum
rate, in Kbps, to adapt to for traffic from the port toward the CPE.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
min-downstream-speed – Valid rates are:
– For dmt and ansi: 64 to 8128 Kbps in 32 Kbps increments. The default is 128.
– For g.lite: 64 to 4000 Kbps in 32 Kbps increments. The default is 128.
Example:
IAC#configure interface dsl 1/2 min-downstream-speed 96
configure interface dsl {
port_id
} min-snr-margin {
margin
}
Minimum Access Level: Administrator
The configure interface dsl min-snr-margin command specifies the minimum SNR
margin, in dB, required for the port. See
SNR Margin (DSL Interfaces)
on page A-22 for
more information.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
margin – Valid choices are 0–15 dB in 1 dB increments. The default is 0.
Examples:
IAC#configure interface dsl 1/1 min-snr-margin 9
configure interface dsl {
port_id
} min-upstream-speed {
rate
}
Minimum Access Level: Administrator
The configure interface dsl min-upstream-speed command specifies the minimum
rate, in Kbps, to adapt to for traffic toward the port from the CPE.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
rate – Valid rates are 32 to 1024 Kbps in 32 Kbps increments. The default is 64.
Example:
IAC#configure interface dsl 1/2 min-upstream-speed 64
configure interface dsl {
port_id
} name {
port_name
}
Minimum Access Level: Administrator
The configure interface dsl name command specifies a unique name for this port.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
name – May be up to 16 printable characters. The name may not include a forward slash
(/) or the following keywords: all, dhcp, downlink, mgmt, uplink, or v35.
Example:
IAC#configure interface dsl 1/1 name Room_100
Table A-10. Configure Interface Command (5 of 11)