Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 59 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-21
configure interface v35 rate {
rate
}
Minimum Access Level: Administrator
The configure interface v35 rate command specifies the port rate in Kbps for the
V.35/X.21 interface on a 4804 Management Module. This value is ignored if clock-source
is external.
rate – Valid rates are 64 to 8192 Kbps in 64 Kbps increments. The default is 2048.
Example:
IAC#configure interface v35 rate 1536
configure interface v35 show
Minimum Access Level: Administrator
The configure interface v35 show command displays parameters for the V.35/X.21 port
without leaving configuration mode.
Example:
IAC#configure interface v35 show
configure interface v35 state {disabled | enabled}
Minimum Access Level: Administrator
The configure interface v35 state command specifies the availability of the V.35/X.21
interface on a 4804 Management Module.
state – Valid choices are disabled and enabled. The default is enabled.
Example:
IAC#configure interface v35 state disabled
configure interface v35 type {eia530a | v35 | x21}
Minimum Access Level: Administrator
The configure interface v35 type command specifies the electrical interface used for the
V.35/X.21 port on a 4804 Management Module.
type – Valid choices are:
– eia530a – The interface is EIA-530-A.
– v35 – The interface is V.35. This is the default.
– x21 – The interface is X.21.
Example:
IAC#configure interface v35 type v35
Table A-10. Configure Interface Command (11 of 11)