Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 67 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-29
configure management ipsec connection modify
{
connection_name
} encryption-key {
key_string
}
Minimum Access Level: Administrator
The configure management ipsec connection modify encryption-key command sets
the encryption key for a specified connection.
connection_name – Specifies the name of the connection policy to modify.
key_string – Defines the key. This is a string of up to 16 hexadecimal digits (0–f).
Example:
IAC#configure management ipsec connection modify sec2
encryption-key d2e4d3c1
configure management ipsec connection modify
{
connection_name
} protocol {ah | esp}
Minimum Access Level: Administrator
The configure management ipsec connection modify protocol command sets the
IPsec encryption protcol for a specified connection.
connection_name – Specifies the name of the connection policy to modify.
ah – Specifies that the protocol is Authentication Header.
esp – Specifies that the protocol is Encapsulating Security Payload.
Example:
IAC#configure management ipsec connection modify sec2 protocol ah
configure management ipsec connection modify
{
connection_name
} remote-host-address {
remote_host
}
Minimum Access Level: Administrator
The configure management ipsec connection modify remote-host-address
command changes the IP address of the remote host using the IPsec tunnel for a
specified connection.
connection_name – Specifies the name of the connection policy to modify.
remote_host – Specifies the IP address of the remote host. It does not need to be
routable. It may be a single IP address or two IP addresses separated by a hyphen
denoting a range of IP addresses.
Examples:
IAC#configure management ipsec connection modify sec1
remote-host-address 135.90.27.2
IAC#configure management ipsec connection modify sec2
remote-host-address 135.90.27.2-135.90.27.23
Table A-12. Configure Management Command (6 of 9)