Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 103 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-65
show sntp
Minimum Access Level: User
The show sntp command displays the configuration parameters for SNTP.
Example:
IAC#show sntp
Display results:
„
state – Whether the unit makes SNTP requests:
– disable – The unit does not make SNTP requests.
– enable – The unit updates the date and time periodically by sending requests to an
SNTP server.
„
ip address – The address defined for the SNTP server.
„
interval – The number of hours between SNTP requests.
show syslog
Minimum Access Level: User
The show syslog command displays the configuration and contents of the system log.
Example:
IAC#show syslog
Display results:
„
threshold – The level of messages written to the log:
– emergency – Only emergency messages are written to the system log.
– alert – Emergency and alert messages are written to the system log. This is the
default.
– information – Emergency, alert, and informational messages are written to the
system log.
– debug – Emergency, alert, informational, and debugging messages are written to
the system log.
„
rate-limiting – Whether rate limiting (suppression of duplicate messages) is in effect
(disabled or enabled).
„
Priority – The level of the message.
„
Date and Time – The date and time the message was written.
„
Message – The message text.
Table A-32. Show Command (14 of 20)