Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 58 / 208

A. CLI Command Descriptions
A-20
July 2002 4800-A2-GB20-10
configure interface v35 clock-source {external | internal}
Minimum Access Level: Administrator
The configure interface v35 clock-source command specifies the source of clocking for
the V.35/X.21 interface on a 4804 Management Module.
clock-source – Valid choices are external and internal. The default is external. If
interface-type is set to x21 (X.21), the only valid option is internal.
Example:
IAC#configure interface v35 clock-source internal
configure interface v35 flow-control {cts | dsr | none}
Minimum Access Level: Administrator
The configure interface v35 flow-control command determines what lead, if any, is
used for flow control.
flow-control – Valid choices are:
– cts – The CTS lead is monitored for flow control.
– dsr - The DSR lead is monitored for flow control.
– none - No hardware flow control is used. This is the default.
Example:
IAC#configure interface v35 flow-control dsr
configure interface v35 idle-char {flag | mark}
Minimum Access Level: Administrator
The configure interface v35 idle-char command specifies whether the port should
transmit the flag character (hexadecimal 7E) or all ones (hexadecimal FF) between
frames on the V.35/X.21 interface on a 4804 Management Module.
flag – Valid choices are flag and mark. The default is flag.
Example:
IAC#configure interface v35 idle-char mark
configure interface v35
invert-tx-clock {disabled | enabled}
Minimum Access Level: Administrator
The configure interface v35 invert-tx-clock command specifies whether the clock
supplied by the 4804 Management Module V.35/X.21 port on the TXC interchange circuit
DB (ITU/T 114) is phase inverted with respect to the Transmitted Data interchange circuit
BA (ITU/T 103).
invert-tx-clock – Invert Transmit Clock. Valid choices are disabled and enabled. The
default is disabled.
Example:
IAC#configure interface v35 invert-tx-clock enabled
Table A-10. Configure Interface Command (10 of 11)