Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 108 / 208

A. CLI Command Descriptions
A-70
July 2002 4800-A2-GB20-10
show uplink-tag
Minimum Access Level: User
The show uplink-tag command shows the VLAN tag associated with each DSL port if
uplink tagging is used. See
Configure Uplink-Tag on page A-45.
Example:
IAC#show uplink-tag
Display results:
„
Base vlan tag number – The base value used to set VLANs.
„
Index – The index value used to set VLANs.
„
PORT and VLAN – Port numbers 1–24 or 1–48 are listed followed by their unique
VLAN tag numbers.
show user-accounts
Minimum Access Level: Administrator
The show user-accounts command shows user names configured in the system.
Example:
IAC#show user-accounts
Display results:
„
User Name – The name used for logging in. Passwords are not displayed.
„
Privilege Level – The access level assigned to this user name:
– admin – The user name has administrator privileges.
– user – The user name has user privileges.
show users
Minimum Access Level: User
The show users command shows users currently logged on the system.
Example:
IAC#show users
Display results:
„
User – User name.
„
Port – Mode of access:
– console – Console port.
– modem – Modem port.
– telnet – Telnet session.
– web – Web interface.
„
Location – For Telnet and Web interface sessions, the IP address of the user. For the
Console port and the Modem port, n/a (Not Applicable).
Table A-32. Show Command (19 of 20)