Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 51 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-13
configure interface dsl {
port_id
} behavior {adaptive | fixed}
Minimum Access Level: Administrator
The configure interface dsl behavior command specifies whether the port will adapt its
rate to line conditions.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
behavior – Valid choices are:
– adaptive – The rate automatically adapts to line conditions at startup. This is the
default.
– fixed – Only one rate is allowed downstream or upstream, defined by
max-downstream-speed and max-upstream-speed.
Example:
IAC#configure interface dsl 1/48 behavior fixed
configure interface dsl {
port_id
}
latency {fast | interleaved}
Minimum Access Level: Administrator
The configure interface dsl latency command specifies whether an interleave buffer is
used.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
latency – Valid choices are:
– fast – No interleave buffer is used. This is the default.
– interleaved – This port uses an interleave buffer.
Example:
IAC#configure interface dsl 1/24 latency interleaved
configure interface dsl {
port_id
}
line-code {ansi | dmt | g.lite | multimode}
Minimum Access Level: Administrator
The configure interface dsl line-code command specifies the line code for a DSL port.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
line-code – Valid choices are:
– ansi – The port uses ANSI T1.413-1998.
– dmt – The port uses G.dmt (G.992.1).
– g.lite – The port uses G.lite (G.992.2).
– multimode – The port automatically senses the line code in accordance with
G.994.1. This is the default.
Example:
IAC#configure interface dsl 1/24 line-code ansi
Table A-10. Configure Interface Command (3 of 11)