Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 75 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-37
configure security mac {
port_id
} add {
mac_address
}
Minimum Access Level: Administrator
The configure security mac add command specifes a MAC address allowed to send
data to a particular DSL port. The address is added to a table of up to 20 entries.
port_id – Identifies the port to be affected. The possible forms of the identifier are
described in
Chapter 2, Terminology and Conventions .
mac_address – Specifies a MAC address allowed to send data to the port. Traffic from
any other MAC address is dropped. Adding an address automatically enables the MAC
address filtering feature for the port. The address must be in the form
xx-xx-xx-xx-xx-xx,
where each x is a hexadecimal digit 0–f.
Example:
IAC#configure security mac 1/1 add 00-01-d2-e4-d3-c1
configure security mac {
port_id
} delete {
mac_address
| all}
Minimum Access Level: Administrator
The configure security mac delete command deletes a MAC address in the table of
addresses allowed to send data to a particular DSL port.
port_id – Identifies the port to be affected. The possible forms of the identifier are
described in
Chapter 2, Terminology and Conventions .
mac_address – Specifies a MAC address to be deleted. The address must exist in the
table of addresses for this port. You can display the table using the configure security mac
show command. The address must be in the form
xx-xx-xx-xx-xx-xx, where each x is a
hexadecimal digit 0–f.
all – Specifies that all MAC addresses defined for the port are to be deleted. The MAC
address filtering feature is disabled for the port.
Example:
IAC#configure security mac 1/1 delete 00-01-d2-e4-d3-c1
configure security mac {
port_id
} show
Minimum Access Level: Administrator
The configure security mac show command displays the table of MAC addresses
allowed for a particular DSL port.
port_id – Identifies the port whose table is to be displayed. The possible forms of the
identifier are described in
Chapter 2, Terminology and Conventions .
Example:
IAC#configure security ip 1/48 show
Table A-14. Configure Security Command (3 of 3)