Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 102 / 208

A. CLI Command Descriptions
A-64
July 2002 4800-A2-GB20-10
show security ip [
port_id
]
Minimum Access Level: User
The show security ip command displays the settings for IP address security.
port_id – Specifies the port to be displayed. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions. If all is
specified or the parameter is omitted, information for all ports is displayed.
Example:
IAC#show security ip 1/48
Display results:
„
State – Whether IP security is in effect (disabled or enabled).
„
Maximum IP addresses – Maximum number of IP addresses allowed on the port.
„
Port – DSL port ID.
„
IP Address – IP address allowed on the port.
„
NHR – Next Hop Router for the port.
„
Type – The source of the address:
– dynamic – The address was learned.
– static – The address was added to the table of allowed addresses by the
administrator.
show security mac [
port_id
]
Minimum Access Level: User
The show security mac command shows the settings for MAC address security.
port_id – Specifies the port to be displayed. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions. If all is
specified or the parameter is omitted, information for all ports is displayed.
Example:
IAC#show security mac 1/48
Display results:
„
State – Whether MAC security is in effect (disabled or enabled).
„
Port – DSL port ID.
„
MAC Address – MAC address allowed to send data to the port.
Table A-32. Show Command (13 of 20)