Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 90 / 208

A. CLI Command Descriptions
A-52
July 2002 4800-A2-GB20-10
Show
The show command displays configuration options and statistics.
Table A-32. Show Command (1 of 20)
show bridge [
port_id
]
Minimum Access Level: User
The show bridge command displays the MAC table.
port_id – Specifies that the display should be limited to entries for a single port.
Example:
IAC#show bridge
Display results:
„
Mode – The functional mode of the bridge:
– switched – Switched mode. The system acts as a transparent learning bridge.
– multiplexing – The system treats each DSL port as if it were a private network
connected to the uplink, and never forwards data on another DSL port.
– sms – The system treats each DSL port as if it were a private network connected to
the uplink, and never forwards data on another DSL port. In addition, a
management VLAN is created on the uplink for use by the SMS.
„
Total Entries – The number of entries currently in the table.
„
hardware address – The MAC address of the table entry.
„
port-id – The port ID of the entry.
„
status – The status of the entry:
– invalid – This learned entry has timed out but has not yet been deleted.
– learned – This entry was learned.
– management – This entry has a matching static address.
– other – None of the other statuses apply to this entry.
– self – This entry is the BitStorm 4800.
show bridge timeout
Minimum Access Level: User
The show bridge timeout command displays the bridge table entry timeout value in
seconds.
Example:
IAC#show bridge timeout
Display results:
„
timeout – The bridge table entry timeout value.