Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 93 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-55
show interface console
Minimum Access Level: User
The show interface console command displays the configuration of the Console port on
the 4800 or 4804 Management Module.
Example:
IAC#show interface console
Display results:
Configuration parameters for the port. See the configure interface console commands
in
Table A-10, Configure Interface Command , for information about the parameters.
show interface dsl {
port_id
} clear-statistics
Minimum Access Level: User
The show interface dsl clear-statistics command resets statistics for all DSL ports or a
specified DSL port.
port_id – Specifies that the display should be limited to this specified port. If all is
specified, all statistics are cleared.
clear-statistics – Resets to zero the statistics for this session. This affects only the
statistics displayed using the show command during this session. All statistics continue to
be maintained.
Example:
IAC#show interface dsl all clear-statistics
show interface dsl {
port_id
} configuration
Minimum Access Level: User
The show interface dsl configuration command displays information about all DSL
ports or a specified DSL port.
port_id – Specifies that the display should be limited to this specified port. If all is
specified, information is displayed for all ports.
configuration – Specifies that the port’s configuration should be displayed.
Example:
IAC#show interface dsl 1/1 configuration
Display results:
Configuration parameters for the port. See the configure interface dsl commands in
Table A-10, Configure Interface Command , for information about the parameters.
Table A-32. Show Command (4 of 20)