Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 74 / 208

A. CLI Command Descriptions
A-36
July 2002 4800-A2-GB20-10
configure security ip {
port_id
} delete {
ip_address
}
Minimum Access Level: Administrator
The configure security ip delete command deletes an IP address in the table of
addresses allowed to be active on a particular DSL port.
port_id – Identifies the port to be affected. The possible forms of the identifier are
described in
Chapter 2, Terminology and Conventions .
ip_address – Specifies an IP address to be deleted. The address must exist in the table
of addresses for this port. You can display the table using the configure security ip
show command.
Example:
IAC#configure security ip 1/1 delete 135.27.90.2
configure security ip {
port_id
} max-ip {
max_ip
}
Minimum Access Level: Administrator
The configure security ip max-ip command specifes the number of IP addresses
allowed to be active on a particular DSL port. For more information see
IP Security
on
page A-38.
port_id – Identifies the port to be affected. The possible forms of the identifier are
described in
Chapter 2, Terminology and Conventions .
max_ip – Specifies the maximum number of IP addresses allowed on the port. The valid
range is 1–20. The default is 1.
Example:
IAC#configure security ip 1/48 max-ip 2
configure security ip {
port_id
} show
Minimum Access Level: Administrator
The configure security ip show command displays the table of addresses allowed for a
particular DSL port.
port_id – Identifies the port whose table is to be displayed. The possible forms of the
identifier are described in
Chapter 2, Terminology and Conventions .
Example:
IAC#configure security ip 1/48 show
Table A-14. Configure Security Command (2 of 3)