Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 68 / 208

A. CLI Command Descriptions
A-30
July 2002 4800-A2-GB20-10
configure management ipsec connection modify
{
connection_name
} remote-tunnel-address {
remote_host
}
Minimum Access Level: Administrator
The configure management ipsec connection modify remote-tunnel-address
command changes the routable IP address of the IPsec tunnel at the remote end for a
specified connection.
connection_name – Specifies the name of the connection policy to modify.
remote_host – Specifies the routable IP address of the IPsec tunnel at the remote end.
Example:
IAC#configure management ipsec connection modify sec1
remote-tunnel-address 135.90.27.3
configure management ipsec connection modify
{
connection_name
} spi {
spi
} [in | out | both]
Minimum Access Level: Administrator
The configure management ipsec connection modify spi command sets the Security
Profile Index for the Encapsulating Security Payload protocol for a specified connection.
connection_name – Specifies the name of the connection policy to modify.
spi – The SPI number (1–65535).
in – The SPI is assigned to the inbound connection.
out – The SPI is assigned to the outbound connection.
both – The SPI is assigned to both the inbound and outbound connections. This is the
default.
Example:
IAC#configure management ipsec connection modify sec2 spi 27
configure management ipsec local-tunnel-address
{
local_tunnel_address
}
Minimum Access Level: Administrator
The configure management ipsec local-tunnel-address command defines the IP
address of the near end of the IPsec tunnel.
local_tunnel_address – Specifies the IP address of the near end of the IPsec tunnel.
Example:
IAC#configure management ipsec local-tunnel-address 10.10.10.12
Table A-12. Configure Management Command (7 of 9)