Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 92 / 208

A. CLI Command Descriptions
A-54
July 2002 4800-A2-GB20-10
show filter-binding [filter [
filter_name
]] | [port [
port_id
]]
Minimum Access Level: User
The show filter-binding command displays the bindings of filters to interfaces.
filter – Specifies that output is sorted by filter name.
filter_name – Specifies that the display should be limited to a single filter.
port – Specifies that output is sorted by port number.
port_id – Specifies that the display should be limited to a single port.
Example:
IAC#show filter-binding
Display results:
„
port-id – The port the rule is bound to.
„
filter-name – The name of the filter.
„
direction – The direction of the data stream affected by this binding:
– inbound – Traffic toward the port is affected.
– outbound – Traffic from the port is affected.
show filter-rule [
rule_name
]
Minimum Access Level: User
The show filter-rule command displays configured filter rules.
filter_name – Specifies that the display should be limited to a single filter.
Example:
IAC#show filter-rule
Display results:
rule-name – The name assigned to the rule.
„
type – The rule type:
– ether – The rule is based on Ethertypes.
– ether-snap – The rule applies to Layer 2 SubNetwork Access Protocol (SNAP)
traffic.
„
action – The action to perform if the rule is satisfied:
– forward – The packet is forwarded.
– discard – The packet is discarded.
„
rule – The rule criteria:
– The Ethertypes the rule affects.
Table A-32. Show Command (3 of 20)