Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 50 / 208

A. CLI Command Descriptions
A-12
July 2002 4800-A2-GB20-10
configure interface console stop-bits {1 | 2}
Minimum Access Level: Administrator
The configure interface console stop-bits command sets the number of stop bits
delimiting a byte on the Console port.
stop-bits – Valid choices are 1 and 2. The default is 1.
Example:
IAC#configure interface console stop-bits 1
configure interface dsl {
port_id
} atm data-connection {
vpi/vci
}
Minimum Access Level: Administrator
The configure interface dsl atm data-connection command specifies, by VPI/VCI, the
virtual circuit used for data.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology in Chapter 2, Terminology and Conventions.
atm data-connection – Valid input is the VPI/VCI for the data connection. The default is
0/35. The valid range for VPI is 0–15. The valid range for VCI is 32–255.
Examples:
IAC#configure interface dsl 1/1 atm data-connection 1/35
configure interface dsl {
port_id
}
atm encapsulation {llc-bridged | vcm-bridged}
Minimum Access Level: Administrator
The configure interface dsl atm encapsulation command specifies whether the port
uses Logical Link Control (LLC) or Virtual Channel Multiplexing (VCM) bridged
encapsulation.
port_id – Identifies the port to be configured. The possible forms of the identifier are
described in
System Terminology
in Chapter 2,
Terminology and Conventions.
atm encapsulation – Valid choices are:
– llc-bridged – The interface uses LLC bridged encapsulation. This is the default.
– vcm-bridged – The interface uses VCM bridged encapsulation.
Example:
IAC#configure interface dsl 1/1 atm encapsulation vcm-bridged
Table A-10. Configure Interface Command (2 of 11)