Paradyne BitStorm 4800 Express, Руководство пользователя

Страница: 69 / 208

A. CLI Command Descriptions
4800-A2-GB20-10 July 2002
A-31
configure management snmp
access-validation {disabled | enabled}
Minimum Access Level: Administrator
The configure management snmp access-validation command specifies whether the
BitStorm 4800 validates the IP address of incoming SNMP (Simple Network Management
Protocol) messages.
disabled – No access validation occurs. This is the default.
enabled – If the IP address of an SNMP packet is not one of those specified using the
configure management snmp nms-address command, the packet is discarded.
Example:
IAC#configure management snmp access-validation enabled
configure management snmp
nms-address {
nms_address1
}... [
nms_address8
]
Minimum Access Level: Administrator
The configure management snmp nms-address command specifies the IP addresses
of up to eight NMS (Network Management System) workstations allowed to access the
BitStorm 4800. If SNMP Access Validation is disabled, these addresses have no effect.
nms_address1
...
nms_address8 – Specifies one to eight IP addresses of NMS
workstations.
Example:
IAC#configure management snmp nms-address 135.76.90.90 135.76.91.1
configure management snmp
nms-traps {
traps_address1
}... [
traps_address8
]
Minimum Access Level: Administrator
The configure management snmp nms-traps command specifies the IP addresses of
up to eight trap managers to which traps are sent.
traps_address1
...
traps_address8 – Specifies one to eight IP addresses of traps
managers.
Example:
IAC#configure management snmp nms-traps 135.76.90.90 135.76.91.1
configure management snmp
private-string {
private_community_string
}
Minimum Access Level: Administrator
The configure management snmp private-string command specifies the community
string for read-write access.
private_community_string – Specifies the string used for read-write access. It may be
up to 64 printable characters. The default is public.
Example:
IAC#configure management snmp private-string topsecret
Table A-12. Configure Management Command (8 of 9)