Panasonic Electric Works Nordic AB
MEW01351
Rev: -
Planning Instructions Fire alarm system EBL512 G3, V1.1.x
26
6
Expansion boards 458x
Inside EBL512 G3 (5000 and 5001) there are space and holders for up
to six optional expansion boards of the types
4580, 4581 and 4583
to
be mounted, see drawing 512 G3 - 01. A ribbon cable
5089
shall be
used for connection of up to six expansion board(s) to the main board.
(Connector "J2" on the expansion board respectively and "J9" on the
main board 5010.) See drawing 512 G3 - 26.
Figure 3. 8 zones expansion board
4580
, 8 relays expansion
board
4581
and In- and outputs expansion board
4583
.
I/O Matrix board 4582
11
is a special type of "expansion board",
plugged as a "piggy back" to an
Application board
11
, which is
connected to a COM loop and to 24 V DC. On each COM loop 0-3
can up to six 4582 boards be used (i.e. up to 24 boards in total).
NOTE!
COM loop
0
is however a special loop, since the exp. boards
4580, 4581 and 4583 actually are internally connected on this loop,
i.e. on COM loop
0
can in total up to six 4580, 4581, 4583 and 4582
boards be used. This means that for each exp. board 4580, 4581 and
4583 used, the number of 4582 boards is reduced with one.
Figure 4. I/O Matrix board
4582
.
Max. six of the I/O Matrix boards 4582 can be programmed as type
Generic and/or Zone control.
NOTE! < 200 programmable outputs per c.i.e. can be used.
Each expansion board 4580, 4581 & 4583 and the I/O Matrix board
4582 have to have a board address (board no. 0-5) set via jumpers on
the board respectively. On boards of type 4580, 4581 and 4583
jumpers "JP2-JP4" and on board type 4582 jumpers "JP1-JP3", see
Figure 5, page 27. All the board programming is done via WinG3.
11
The 4582 board can be programmed as type Fan, Generic or Zone control.
It is mostly used with Australian Application boards but the General I/O
application board 4596 and Fan control application board 4594 (used with the
Fan control panel 4593) are available on all markets, see page 51.
Содержание EBL512 G3 5000
Страница 2: ...This page has deliberately been left blank ...
Страница 167: ...This page has deliberately been left blank ...