Oracle Sun Datacenter InfiniBand Switch 648, Руководство по установке

Страница: 26 / 140

16 Sun Datacenter InfiniBand Switch 648 Installation Guide • May 2010
■
“Fabric Card Distribution” on page 17
■
“Fabric Card Handling Guidelines” on page 17
■
“Line Card Distribution” on page 17
■
“Line Card Handling Guidelines” on page 18
■
“Fabric Card and Line Card Fillers” on page 18
■
“Installation Preparation” on page 19
■
“Suggested Tools for Installation” on page 19
■
“Antistatic Precautions for Installation” on page 20
■
“Installation Responsibilities” on page 20
■
“Installation Sequence” on page 20
Related Information
■
Switch Administration , understanding administrative commands
■
Switch Service , understanding service procedures
Supported Configurations
The switch is sold with two configurations, ATO and fully populated.
With an ATO configuration, you must configure the quantity of fabric cards and line
cards at the time of ordering. With a less than a fully populated switch, fabric card
fillers and line card fillers are automatically included in the order, to fill the vacant
slots.
In the fully populated configuration, the switch ships with the following:
■
9 line cards
■
9 fabric cards
■
1 midplane stiffener
■
4 power supplies
■
2 CMCs
The fabric card and line card distribution determine how you configure a switch that
is not fully populated.
Related Information
■
“Installing the Components” on page 63