Oracle Sun Datacenter InfiniBand Switch 648, Руководство по установке

Страница: 90 / 140

80 Sun Datacenter InfiniBand Switch 648 Installation Guide • May 2010
▼
Check the Power Supply Status LEDs
1. Identify the prerequisite and subsequent tasks you must perform in
conjunction with this procedure, to install the switch.
See the table in “Installation Sequence” on page 20 .
2. Visually inspect the power supply status LEDs.
3. Compare what you see to the following table.
4. Verify the CMC status LEDs indicate a normal start up.
The OK LED should be lit and the Attention LED should be unlit. See “Check the
CMC Status LEDs” on page 80 .
Related Information
■
Switch Administration , checking status LEDs
■
“Check the CMC Status LEDs” on page 80
■
“Check the Fabric Card Status LEDs” on page 96
■
“Check the Line Card Status LEDs” on page 103
■
“Check the CXP Connector Status LEDs” on page 115
▼
Check the CMC Status LEDs
1. Identify the prerequisite and subsequent tasks you must perform in
conjunction with this procedure, to install the switch.
See the table in “Installation Sequence” on page 20 .
2. Visually inspect the CMC status LEDs.
Glyph Name Color State and Meaning
OK Green On – Power supply enabled, 12 VDC is supplied.
Off – No input voltage.
Flashing – Power supply disabled, 12 VDC is not supplied.
Attention Amber On – Fault detected, 12 VDC shut down.
Off – Normal operation.
Flashing – No function.