Oracle Sun Datacenter InfiniBand Switch 648, Руководство по установке

Страница: 91 / 140

Installing the Switch 81
3. Compare what you see to the following table:
4. Access the CMC and configure the
uboot
parameters.
See “Access the CMC From the Serial Management Port” on page 82 .
Related Information
■
Switch Administration , checking status LEDs
■
“Check the Power Supply Status LEDs” on page 80
■
“Check the Fabric Card Status LEDs” on page 96
■
“Check the Line Card Status LEDs” on page 103
■
“Check the CXP Connector Status LEDs” on page 115
Accessing the CMC
With power applied, you can now access the CMCs by performing these tasks in the
following order.
Glyph Name Color State and Meaning
OK Green On – CMC is operating normally.
Off – No power is being supplied to the CMC.
Flashing – CMC is inactive status as the backup CMC.
Attention Amber On – A fault or critical error has been detected.
Off – Normal operation.
Flashing – No function.
Ready-to-Remove Blue On – CMC has been deactivated and is ready to be removed.
Off – Do not remove.
Flashing – No function.
Step Description Links
1. Access the CMC from the serial
management port. “Access the CMC From the Serial
Management Port” on page 82
2. Set the initial
uboot
parameters. “Set the Initial UBoot Parameters” on
page 83
3. Access the CMC from the network
management port. “Access the CMC From the Network
Management Port” on page 84