3
-8
Quick Programming Mode
In quick programming mode, the parameters required for Inverter trial operation can be monitored and set.
parameters can be changed from the setting displays. Use the Increment, Decrement and Digit Selection/
RESET keys to change the frequency. The user parameter will be written and the monitor display will be
returned to when the ENTER key is pressed after changing the setting.
Refer to Chapter 5 Parameters for details on the parameters displayed in Quick Programming Mode.
Example Operations
Key operations in quick programming mode are shown in the following figure.
Fig 3.5 Operations in Quick Programming Mode
Reference selection
Quick Programming Mode
Operation Method selection
Stopping Method selection
Terminal FM Gain
Motor Protection selection
Terminal AM Gain
Decelaration stall selection
Mode Selection Display
Monitor display
Setting Display