3
-10
Setting Parameters
Here, the procedure is shown to change C1-01 (Acceleration Time 1) from 10 s to 20 s.
Table 3.3 Setting User parameters in Advanced Programming Mode
Step
No.
Digital Operator Display
Description
1
Power supply turned ON.
2
MENU Key pressed to enter drive mode.
3
MENU Key pressed to enter quick program-
ming mode.
4
MENU Key pressed to enter advanced pro-
gramming mode.
5
ENTER pressed to access monitor display.
6
Increment or Decrement Key pressed to dis-
play C1-01 (Acceleration Time 1).
7
ENTER Key pressed to access setting display.
The setting of C1-01 (10.00) is displayed.
8
Digit Selection/RESET
Key pressed to
move the flashing digit to the right.
9
Increment Key pressed to change set value to
20.00 s.
10
ENTER Key pressed to enter the set data.
“END” is displayed for 10 s and then the
entered value is displayed for 0.5 s.
11
The monitor display for C1-01 returns.
