Modes
3
-
7
Drive Mode
Drive mode is the mode in which the Inverter can be operated. The following monitor displays are possible in
drive mode: The frequency reference, output frequency, output current and output voltage, as well as fault
information and the fault history.
When b1-01 (Reference selection) is set to 0, the frequency can be changed from the frequency setting dis-
play. Use the Increment, Decrement and Digit Selection/RESET keys to change the frequency. The user
parameter will be written and the monitor display will be returned to when the
ENTER
key is pressed after
changing the setting.
Example Operations
Key operations in drive mode are shown in the following figure.
Fig 3.4 Operations in Drive Mode
IMPORTANT
The display for the first monitor parameter (frequency reference) will be displayed when power is turned
ON. The monitor item displayed at startup can be set in o1-02 (Monitor Selection after Power Up).
Operation cannot be started from the mode selection display.
