Omron GX-AD0471 Скачать руководство пользователя страница 307

Страница: 307 / 394

A - 3

A Appendix

GX-series EtherCAT Slave Unit User’s Manual

A-1 Obje

ct Diction

ary

A-1
-3 Obje

ct D

escription For

In this manual, objects are described in the following format.

The following values are indicated within the pointed brackets <>.

A-1-3

Object Description Format

Object description format

<Index>

Range: <Setting range>

Unit: <Unit>

Default: <Default setting>

Attribute: <Data attribute>

Size: <Size>

Access: <Access>

PDO map: <Possible/Not possible>

Object description format with sub-indexes

<Index>

Sub-index 0
Range: <Setting range>

Unit: <Unit>

Default: <Default setting>

Attribute: <Data attribute>

Size: <Size>

Access: <Access>

PDO map: <Possible/Not possible>

•
•
•
Sub-index N
Range: <Setting range>

Unit: <Unit>

Default: <Default setting>

Attribute: <Data attribute>

Size: <Size>

Access: <Access>

PDO map: <Possible/Not possible>

Indexes

: An object index given by a four-digit hexadecimal number

Object name

: The object name

Range

: The possible range of settings

Unit

: Physical unit

Default

: Default value set before product shipment

Attribute

: The data attribute of a writable object

The data attribute is given in the following format.



* (



: Indicates the timing when a change is applied.)

(*: Indicates whether the data is saved to non-volatile memory.)

Timing When a Change Is Applied
A: Enabled at any time.
B: Enabled when moving from count stop status to operation status (Encoder Input

Slave Units only).

C: Enabled when moving from Pre-Operational state to Safe-Operational state.
D: Enabled when moving from Pre-Operational state to Init state.
R: Enabled when power is reset.
-: Read-only

Saving to Non-volatile Memory
With asterisk (*): Saved to non-volatile memory.
Without asterisk (*): Not saved to non-volatile memory.

Size

: The object size is given in bytes

Access

: Indicates whether the object is read only, or read and write

RO: Read only
RW: Read and write

PDO map

: Indicates the PDO mapping possibility

Содержание GX-AD0471











































































































































































































































































































































































































Результаты поиска

Содержание GX-AD0471

Отзывы:

Omron GX-AD0471, Руководство пользователя, Страница: 307 / 394

Результаты поиска

Содержание GX-AD0471

Отзывы: