![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925214.webp)
Page: 140
Service Guide ML393/ML393CPlus
Chapter 4 Failure Analysis
RAP 04: Ribbon Homing Error (ALARM 5B)
START
Is the printer the color model?
NO Is shorting plug SP3 of the control board open?
NO Set it open.
YES Go to A.
YES Manually rotate the ribbon shift cam counterclockwise. Does it rotate smoothly?
NO Check the areas listed below.
No paper scrap or foreign matter on the gear
Smooth gear meshing
No friction at each fulcrum of the carriage bracket, roller lever and ribbon shift arm
YES Is cable CN2 on the sensor board connected correctly?
NO Connect it correctly.
YES Is cable CN4 on the control board connected correctly?
NO Connect it correctly.
YES Is there dirt or dust on the ribbon home sensor on the sensor board?
YES Clean the sensor.
NO Go to A.
A
Replace the sensor board.
Has the problem been resolved?
YES End of procedure.
NO Replace the bail/ribbon motor.
Has the problem been resolved?
YES End of procedure.
NO Replace the control board.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...