OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 166 / 323

Page: 107
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.3.10 Resets
Menu Reset
CAUTION:
Print the menu before retting it to factory defaults.
When the menu is reset, ALL customized settings ARE LOST.
Printing the Menu provides a reference of customized settings.
If the Menu is set for wide paper, and narrow paper is used, the printhead will print on the platen. This
could damage / destroy the printhead, platen, and ribbon.
To reset place the printer in the Menu Mode, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Press SELECT and place the printer OFF-LINE (SELECT will NOT be lit).
5. Press QUIET to enter Menu Mode.
6. The line shown below will print.
Font Print Quality LQ
7. Press PRINT to print the current Menu.
When the menu is reset, ALL customized settings ARE LOST.
Printing the Menu provides a reference of customized settings.
8. Power OFF the printer.
9. Press TOF and SELECT while powering ON the printer.
10. The Menu is reset to Factory Defaults.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)