manualshive.com logo in svg

OKIDATA ML393C Plus, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA ML393C Plus Скачать руководство пользователя страница 217

Page: 143

Service Guide ML393/ML393CPlus

Chapter 4 Failure Analysis

 

RAP 07: Ribbon Feed Trouble

START

Remove the ribbon cartridge and rotate the ribbon cartridge ribbon feed knob.

Does it rotate smoothly?

YES Check to see if the ribbon lock mechanism has been disengaged.

NO Replace the ribbon cartridge.

Manually shift the carriage to the left and to the right.

Does the ribbon feed shaft rotate?

NO Replace the ribbon feed assembly.

After the replacement, adjust the backlash between the space motor gear and bevel gear.

YES Check that the ribbon feed shaft is correctly engaged with the ribbon feed roller of the ribbon 
cartridge.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание ML393C Plus




































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды