OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 136 / 323

Page: 86
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.30 Rear Bin
6. Power OFF the printer.
7. Remove the cut sheet feeder.
8. Remove the front sheet supporter (1).
9. Remove the rear sheet supporter (2).
10. Use a screwdriver (5) to push the lock levers (6) in the direction of arrow A. The levers are inside the
left side cover (3) and right side cover (4) of the rear-bin unit (10).
11. Move the rear-bin unit (11) in the direction of arrow D to disengage the lock plate (8) from the post (7)
on the front bin unit (10).
12. Lift the rear-bin unit (11) in the direction of arrow C and pull in the direction of arrow D to disengage
the lock plate (8) from the post (9) on the front bin unit (10). The rear-bin unit (11) will disengage from the
front-bin unit (10).
NOTE:
Installation
Engaging the front-bin unit to the rear-bin unit.
Keep the lock plate (8) on the post (9).
Press the rear-bin unit (11) against the front-bin unit (10).
The lock lever (6) will engage with the post (7).