![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925205.webp)
Inconsistent Line Feed
Possible Causes
· Power OFF the printer. Turn the platen knob. The platen should rotate smoothly. If it does not, remove
the cause of the binding.
· Make sure that the line feed belt tension is within specification. If it is not, tighten the line feed belt.
· Defective line feed motor. Replace the line feed motor.
Drifting Margin
Possible Causes
· Power OFF the printer. Move the carriage assembly. The carriage should move smoothly. If it does not,
remove the cause of the binding.
· Make sure that the space belt tension is within specification. If it is not, tighten the belt.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...