![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925089.webp)
Page: 60
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.08 Printer Mechanism
1. Remove the upper cover assembly
(3.2.04
).
2. Remove the control board
(3.2.06
).
3. Detach connectors CN102 (1) and CN103 (2) from the interface connector board.
4. Remove the three mounting screws (3) at the rear of the printer mechanism (4).
5. Remove the three mounting screws and brackets (5). There are two on the left side of the printer
mechanism and one on the right side.
CAUTION:
Do not grasp the ribbon cartridge bracket, paper chute, or the guide shaft of the sheet feeder assembly
when lifting the printer during the next step. These parts are easily bent.
6. While holding the base tray, lift the printer mechanism and remove it.
NOTE:
When assembling the printer, do not allow cables to get caught under the control board.
P/N 50213301 Frame: Base B.2.08
, B.2.11
P/N 50512923 Rubber Grommet (in base) B.2.08
, B.2.11
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...