OKIDATA ML393C Plus, Руководство по обслуживанию

Страница: 163 / 323

Page: 105
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.3.08 Paper Park
General Information
Paper park allows the user to switch from continuous feed paper to single-sheet paper without removing
the continuous feed paper from the printer. The continuous feed paper will be retracted from the platen
and down into the printer housing without disengaging it from the built-in tractor.
After a single-sheet paper is printed, pull the bail lever forward and the continuous feed paper will move
back into the print position.
Paper park cannot be used when the optional pull tractor is installed.
Procedure: Continuous Feed to Single Sheet
1. Tear off any printed pages.
2. Make sure the printer is selected. The SELECT lamp must be lit.
3. Press PARK / TOF.
4. The paper will retract from the paper path.
5. Move the paper selection to the single sheet position (towards the back of the printer).
6. Raise the paper support to its upright position.
7. Align the left paper guide with the paper icon on the support.
8. Place a piece of paper in the paper support.
9. Position the right paper guide to accomodate the right edge of paper.
10. Press FORM FEED to feed single-sheet paper into the printer.
11. Print the single sheet.
Procedure: Single Sheet to Continuous Feed
1. Remove any single-sheet paper in the printer.
2. Move the paper selection lever to the continuous form position (to the front of the printer).
3. Lower the paper support.
4. Press FORM FEED to feed continuous feed paper into the printer.
5. The paper will advance to the loading position.
6. Adjust the top of form (if necessary).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)