![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925251.webp)
Page: 165
Service Guide ML393/ML393CPlus
Chapter A Board Diagrams
A.2.03 Interface Board (LQPN)
Fuses
NONE
Jumpers
SP101
A Side: Auto Feed XT signal of Centronics interface valid
B Side: Auto Feed XT signal of Centronics interface invalid
SP102
A Side: I-Prime Signal of Centronics interface is valid
B Side: I-Prime Signal of Centronics interface is invalid
SP103
A Side: +5 vdc is output to pin 18 of Centronics interface.
B Side: +5 vdc is not output to pin 18 of Centronics interface.
Sensors
NONE
Switches
SW101 - This switch toggles for selecting either the serial or parallel interface.
Firmware
NONE
Test Points
NONE
Содержание ML393C Plus
Страница 74: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 125: ...Copyright 1997 Okidata Division of OKI America Inc All rights reserved See the OKIDATA Business...
Страница 126: ...Partner Exchange BPX for any updates to this material http bpx okidata com...
Страница 278: ...Partner Exchange BPX for any updates to this material http bpx okidata com...